Lapox Metalam Clear System B

Lapox Metalam Clear System B Resin 1000 gm & Lapox Metalam Clear System B Hardner 500 gm,

Best Resin And Hardner to achieve good results of Hand made Projects like, Resin Pouring, Resin Embellishments, Making Jewelry Bases, Coasters & Trays, Table Top Pouring, Mosaic Macking And many more endless opportunities.

Lapox Metalam – B is two component modified, epoxy system. When both components are
mixed in recommended ratios ( 2:1 Ratio For Example 100 gm : 50 gm)  and cured appropriately at room temperature, an excellent results can be achieved on most of the substrates including glass, metals, plastics, wood, paper
stickers and natural stones.

Color: Crystal Clear

Quantity: 1000 gm Resin & 500 gm Hardner In total 1500 gm both put together.

Application: The mixed mass is applied by brush, spatula or through dispensing bottle on the
surface to be coated. The mix must be used within its pot life.

Curing: Curing normally takes place at room temperature within about 24 hours depending on the
ambient temperature but may be accelerated by the application of heat. Faster productivity can be achieved, if curing is performed at higher
temperature between 40°C and 60°C.

Storage and handling Lapox Metalam – B should be stored in a cool and dry place, preferably in a sealed container and
should not be exposed to direct sunlight. This product has a shelf life of one year, if stored in its
original container between 2°C and 40°C away from humidity and excessive heat.
Safety Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct
contact and irritation, it should be washed off immediately with soap and warm water. Avoid
breathing vapors, mist or gas. Please refer to the Safety Data Sheet (SDS) of Lapox Metalam – B for
detailed safety instructions.